Viscosifier
Product Description
CMH is a high-viscosity, technical grade and high purity grade polymer and designed to an viscosity in water based mud.
Similar Product
|
MI SWACO |
BARIOD |
BAKER HUGHES |
|
M-I CMC |
CELLEX |
CMC HV |
Application/Function
Effective filtration controller for aqueous drilling fluids
Increases viscosity and can be used in salt-saturated systems,
Can have a deflocculating effect in seawater systems
Advantages
Cost-effective viscosifier/filtration controller
Functions over wide pH range
Effective in low concentrations
Fermentation resistant
Extends life of foam or stiff foam in air drilling
Technical Data
|
Appearance |
Off-white powder |
|
pH |
6.5-8.0 |
|
Moisture |
10% Max |
Recommended Treatment
Add CMH in concentration of 1.4 to 11.4 kg/m3 (0.5 to 4.0 lb/bbl) to any system. Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
Environmental Information
For information concerning environmental regulations applicable to CMH, contact the Health Safety and Environmental Department.
Shipping
Transportation of commodity name is not restricted by either international or CHINA regulatory agencies.
Safe Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Use of standard PPE is recommended for employee comfort and safety. See Material Safety Data Sheet (MSDS) prior to use.
Package and Storage
25kg bags or according to customer’s requirement.
Avoid high-intensity extreme pressure and prolonged exposure to strong sunlight. Keep bag closed. Keep away from heat, sparks and flames.
