Filtration Control Agent
Product Description
CML is a low viscosity technical grade and high purity grade polymer used as primary fluid loss reducer in most water-base drilling fluids.
Similar Product
|
MI SWACO |
BARIOD |
BAKER HUGHES |
|
CMC LV |
CELLEX |
CMC LV |
Application/Function
Effective filtration controller for aqueous drilling fluids
Has a minimal effect on viscosity and can be used in salt-saturated systems, performing best when chloride concentrations are less than 60 gal (227 L)
Can have a deflocculating effect in seawater systems
Advantages
Cost-effective filtration controller
Functions over wide pH range
Effective in low concentrations
Fermentation resistant
Technical Data
|
Appearance |
Off-white powder |
|
pH |
6.5-8.0 |
|
Moisture |
10% Max |
Recommended Treatment
Add CML in concentration of 1.4 to 11.4 kg/m³ (0.5 to 4.0 lb/bbl) to any system. Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.
Environmental Information
For information concerning environmental regulations applicable to CML, contact the Health Safety and Environmental Department.
Shipping
Transportation of commodity name is not restricted by either international or CHINA regulatory agencies.
Safe Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Use of standard PPE is recommended for employee comfort and safety. See Material Safety Data Sheet (MSDS) prior to use.
Package and Storage
25kg bags or according to customer’s requirement.
Avoid high-intensity extreme pressure and prolonged exposure to strong sunlight. Keep bag closed. Keep away from heat, sparks and flames.
